LED
LCD
Double-Ended Alligator Clip Test Lead (1 Wire) | Pro Tronix
6.00 EGP
Premium single-wire double-ended alligator clip test lead. Outfitted with strong, nickel-plated steel crocodile jaws and fully insulated flexible PVC protective boots on both ends, this versatile tool enables instantaneous, hands-free electrical connections for low-voltage troubleshooting, diagnostics, and DIY electronics.
In stock
Product Description
This Double-Ended Alligator Clip Test Lead is a fundamental troubleshooting and prototyping tool for any electronics bench, physics lab, or DIY workshop. The test line features a flexible, multi-strand insulated wire terminated on both ends with classic spring-loaded crocodile (alligator) clips.
Designed for quick, temporary electrical connections, this single-wire lead allows you to clip onto component legs, header pins, bare wire splices, or breadboard rails without any soldering. Each alligator clip is encased in a soft, flexible PVC boot that acts as an insulator, preventing accidental short circuits against adjacent components while you actively modify or test your live circuit paths.
⚠️ Testing Safety Tip: When working with temporary test leads, always make your connections while your power supply is turned OFF. Once the alligator clips are securely clamped onto your target nodes, double-check that the uninsulated metal jaws are not touching nearby ground rails or other components before restoring power.
Connection Interface & Anatomy
This DIY test lead is engineered for instantaneous, solderless circuit linking:
-
Terminal Type: Double-Ended Crocodile / Alligator spring clips.
-
Insulation Protection: Full-coverage, removable PVC boots on both ends.
-
Jaw Opening Capacity: Spreads up to approximately 8mm to tightly grip thick pins, screw heads, or component leads.
-
Internal Core: Flexible multi-strand copper wire optimized for clean signal conduction and low resistance.
Applications
-
Rapid Prototyping: Creating immediate, temporary electrical bypasses, component bridges, or power lines during initial circuit design phases.
-
Diagnostic Metering: Clamping multimeter probes securely onto a bare circuit node for hands-free voltage, current, or resistance monitoring.
-
Educational Lab DIY: Wiring up quick, low-voltage educational configurations involving small motors, buzzers, and battery holders without soldering.
Technical Specifications
| Parameter | Value / Specification |
| Connector Configuration | Double-ended Alligator (Crocodile) Clips |
| Wire Unit Count | 1 Individual Wire |
| Conductor Core | Multi-strand flexible copper |
| Insulation Boot Material | Soft, protective PVC |
| Clip Material | Nickel-plated steel with strong internal spring |
| Maximum Voltage Rating | Low-voltage prototyping (Up to 30V AC / 60V DC safely) |
| Current Carrying Capacity | Supports up to 2A – 3A safely |
What’s in the Box
-
1 x Double-Ended Alligator Clip Test Lead Wire (Random color selection).
Shipping & Delivery Policy
At Protronix, we ensure your orders are delivered safely and efficiently through multiple reliable channels tailored to your needs.
Our Delivery Methods
-
Egypt Post: Standard shipping to all governorates across Egypt via the National Postal Authority.
-
Uber Scooter: Fast, same-day express delivery for local orders within supported urban areas.
-
Store Pickup: You can skip the shipping fees by collecting your order directly from our main branch.
Related products
cable-Micro-X195
DC Male Power Plug (5.5×2.1mm) to 2-Pin Screw Terminal Block | Pro Tronix
High-quality Male 5.5mm × 2.1mm DC barrel plug adapter featuring an integrated 2-pin screw terminal block. Built with robust molded insulation and explicit polarity markings (+/-), this solderless connector allows for immediate, secure connection of bare power wires to standard female DC sockets on cameras, LED installations, and development hubs.
Female to Female Dupont Jumper Wires (40-Pin / 10cm) | Pro Tronix
Premium 40-pin Female-to-Female Dupont ribbon jumper cable assembly. Featuring a flexible 15cm length ideal for linking hardware modules without breadboard clutter, this standard 2.54mm pitch cable easily peels apart into individual lines. Designed for quick, solderless connections between male development headers and breakout sensors.
Nylon Cable Ties – 2.5mm x 100mm
Reviews
There are no reviews yet.