Showing 13–24 of 31 resultsSorted by popularity

4 Channel 5V Relay Module

SKU: PRO00634
Original price was: 250.00 EGP.Current price is: 220.00 EGP.
Description It is a 4 Channel Isolated 5V 10A Relay Module Opto-coupler, A wide range of microcontrollers such as Arduino,

TTP223 Touch Key Module | Pro Tronix

SKU: PRO00606
Original price was: 30.00 EGP.Current price is: 25.00 EGP.
Ultra-compact TTP223 touch key module driven by the TTP223 detector IC. Supports hardware solder-bridge selection for momentary or toggle operations, allowing clean integration behind protective non-metallic sheets for durable touch panels.

CJMCU-ADS1115 16-Bit Ultra-Compact ADC Development Board | Pro Tronix

SKU: PRO00590
Original price was: 200.00 EGP.Current price is: 180.00 EGP.
Ultra-compact CJMCU-ADS1115 development board delivering high-precision 16-bit resolution over 4 single-ended or 2 differential channels. Features an onboard programmable gain amplifier (PGA) and simple I2C communication, perfect for sensitive millivolt-level analog sensor arrays.

HX1838 VS1838B IR Infrared Receiver Sensor Module with Cable | Pro Tronix

SKU: PRO00579
Original price was: 60.00 EGP.Current price is: 55.00 EGP.
High-sensitivity HX1838 (VS1838B) 38kHz infrared receiver module. Operating on a wide 2.7V to 5.5V DC range, this module features built-in ambient light filtering, an onboard status indicator LED, and a 3-pin interface. The perfect choice for adding wireless remote control capabilities to your Arduino, ESP32, and Raspberry Pi projects.

ADXL345 3-Axis Digital Accelerometer Module | Pro Tronix

SKU: PRO00577
Original price was: 200.00 EGP.Current price is: 195.00 EGP.
Highly accurate ADXL345 3-axis digital accelerometer and gravity sensor module. Operating on a wide 3.0V to 5.0V input range with standard I2C and SPI interfaces, it delivers up to 13-bit resolution across ranges of +/- 2g to +/- 16g. The go-to sensor for Klipper input shaping, gesture detection, and drone stabilization.

Endstop Mechanical Limit Switch Module with Cable (RAMPS 1.4 Compatible) | Pro Tronix

SKU: PRO00548
Original price was: 30.00 EGP.Current price is: 25.00 EGP.
Product Description The Mechanical Endstop Limit Switch is the most reliable and widely used homing sensor for DIY 3D printers,

24V/12V to 5V 5A DC-DC Buck Converter Module with USB & DC Jack | Pro Tronix

SKU: PRO00538
Original price was: 250.00 EGP.Current price is: 225.00 EGP.
High-efficiency, synchronous 24V/12V to 5V 5A DC-DC step-down power module. Equipped with an onboard USB Type-A port, output screw terminals, an input DC barrel jack, and reverse-polarity protection. Ideal for powering Raspberry Pi setups, charging mobile electronics, and driving high-current robotics projects.

TEC1-12706 40×40mm 6A Thermoelectric Peltier Cooler

SKU: PRO00509
Original price was: 250.00 EGP.Current price is: 200.00 EGP.
  • Buy the TEC1-12706 12V 6A Peltier cooler module online. Premium 40x40mm solid-state thermoelectric cooling plate for DIY electronics and refrigerators.

Arduino Leonardo R3

SKU: PRO00687
Original price was: 500.00 EGP.Current price is: 450.00 EGP.
Arduino Leonardo R3 Product Overview The Arduino Leonardo R3 from Pro Tronix is a unique entry in the Arduino lineup.

Arduino Uno R3 Original | Made in Italy

SKU: PRO00681
Original price was: 2,300.00 EGP.Current price is: 2,250.00 EGP.
Arduino Uno R3 Original | Made in Italy Product Overview The Original Arduino Uno R3 from Pro Tronix is the

Arduino Nano 33 IoT | WiFi & Bluetoot

SKU: PRO00676
Original price was: 1,550.00 EGP.Current price is: 1,500.00 EGP.
Buy the Arduino Nano 33 IoT from Pro Tronix in Egypt. A compact, 32-bit board with WiFi, Bluetooth, hardware security, and a 6-axis IMU for smart IoT projects.

H913-A Dual USB Power Bank Charging Module with LED Display

SKU: PRO00670
Original price was: 225.00 EGP.Current price is: 185.00 EGP.
Description Build or repair high-performance portable power banks with the feature-rich H913-A Dual USB Power Bank Charging Module. This premium