Showing 13–16 of 16 resultsSorted by popularity

Show sidebar
Show 9 12 18 24
Clear filters
Compact red mechanical endstop PCB displaying an onboard microswitch with a metal roller lever, a current limiting resistor, a red status indicator LED, and a white 3-pin connection terminal socket.
-17% Sold out
Compare

Endstop Mechanical Limit Switch Module with Cable (RAMPS 1.4 Compatible) | Pro Tronix

SKU: PRO00548
Original price was: 30.00 EGP.Current price is: 25.00 EGP.

Product Description The Mechanical Endstop Limit Switch is the most reliable and widely used homing sensor for DIY 3D printers,

Add to wishlist
Read more
Quick view
Compact blue printed circuit board showcasing an input DC barrel jack and terminal block on the left, an input capacitor, step-down conversion circuitry with a 330 power inductor in the center, and a female USB port next to an output terminal block on the right.
-10% Sold out
Compare

24V/12V to 5V 5A DC-DC Buck Converter Module with USB & DC Jack | Pro Tronix

SKU: PRO00538
Original price was: 250.00 EGP.Current price is: 225.00 EGP.

High-efficiency, synchronous 24V/12V to 5V 5A DC-DC step-down power module. Equipped with an onboard USB Type-A port, output screw terminals, an input DC barrel jack, and reverse-polarity protection. Ideal for powering Raspberry Pi setups, charging mobile electronics, and driving high-current robotics projects.

Add to wishlist
Read more
Quick view
ESP-12F ESP8266 Serial WiFi Module showing castellated edge pins, metal shield casing, and optimized board trace antenna layout
-10% Sold out
Compare

ESP-12F ESP8266 Wifi Wireless IoT Board Module

,
SKU: PRO00480
Original price was: 200.00 EGP.Current price is: 180.00 EGP.

Shop the ESP-12F ESP8266 Serial WiFi Module. Features an upgraded PCB antenna design, 4MB flash, integrated TCP/IP stack, and 2.4GHz Wi-Fi.

Add to wishlist
Read more
Quick view
Ultra-compact blue GY-273 printed circuit board showing a tiny 3-axis magnetometer chip, decoupling capacitors, pulling resistors, and 5 parallel solder pads for pin headers.
-9% Sold out
Compare

GY-273 HMC5883L 3-Axis Digital Compass Magnetometer Module | Pro Tronix

SKU: PRO00459
Original price was: 230.00 EGP.Current price is: 210.00 EGP.

High-precision GY-273 3-axis digital compass and magnetometer module. Operating on a wide 3.0V to 5.0V DC input, it communicates seamlessly over a standard I2C interface to output 12-bit heading and magnetic field strength values. An essential sensor for robot navigation, DIY digital compasses, and metal detection.

Add to wishlist
Read more
Quick view